Mission Prep Tool instructions:-

This is still in a raw form so some of its methods of operation are simplistic.

One fundamental simplification to be aware of. Currently the file containing the airbases must be loaded first,
in the case of the NeoQB template files this is the one called Base-no-trunc.group (553kb). This will be fixed
soon.

For best results i suggest making a copy of the 2 template files provided by NeoQB and pasting them in a new 
folder somewhere. Place the mission prep utility in the same folder. 

Use:-

Run the executable. Click on the "Load Group File" button. If using the NeoQB Templates load Base-no-trunc.group
followed by loading Base-for-trunc.group. You can load additional files or your own files but be aware that there 
is currently no check for duplication.

The central space will now show the airbases in relative positions and colour coded by the country number.
Red = German
Blue = French
Purple = British
Cyan = US
Light Blue = Russian
Green = Italian

The yellow circle is the currently selected location.

To re-center the area of interest you can either:-

	Double click on the "map" where you want it to be.
	Double click on the name of the airbase where you want it centered
	Manually enter a location in the z and x boxes

The radius value can be changed to make the area of interest larger or smaller.

Once you are happy with the Area of interest enter a name in the "output filename" box and click the save button.
This will produce one file for each .group file you loaded. They will be called {your filename)_{number}.group

These files can then be imported into the ROF ME in the usual way.