This is the Red Baron II/3D resources section of Wings of Honor!
Here you will find all available files and documents for Red Baron
II/3D we could find. They are produced by talented members of our
community.
We do not claim to have all files and documents for Red Baron II/3D
ever made available for download
but we try to build the most complete collection of files on the
internet. Please bear in mind that this is work in progress.
Notes On Resources Section And Downloads
Contributions
Have a file to add that we do not have? Send an e-mail to
with a download link and we will gladly integrate it!
Intellectual Property
Each file offered for download here is the intellectual porperty of its author. Please take note of this before downloading or sharing any file offered here.
File Archive Utilities
For handling of the file archives, which may be packed and compressed
in Zip, Rar, 7z and such formats you can use free tools from our
common downloads page.
Just have a look into the Utilities -> Tools subsection.
File Archives Offered For Download Here
NOTE:
Due to the amount of downloads on this site not every file could be
tested for functionality and it may happen that you harm your flight
simulation installation by applying those files. Please make a backup
of your installation folder(s) before you try anything out. We can
not held responsible if anything happens to your computer, operating
system or software installation(s).
Also we can not provide any support to these files. If you
have questions or run into troubles please ask the creator(s) of the
respective enhancement(s) or frequent the various message boards dedicated
to those mods and enhancements. You can always ask those questions on
our forums also but please do not e-mail us.
We try to include a ReadMe file for each file if available for your convenience. Thus you can take a look into the ReadMe file without downloading the file package first. Beware, not every archive contains a ReadMe thus an empty or non-functional link may be displayed.
Where there are files which are not hosted here on Wings Of Honor we link to external resources specifically marked as 'external link'. In those cases this is a reference just for the sake of completeness of the publicly available files. You may view this as a 'file catalogue' of what is available. If available a link to the author's website is also displayed.
Community Support
We at Wings of Honor proudly support the talented members of the
modding communities and we urge you to visit the author's home page
for additional
information about each of these files! For the sake of convenience,
links to the author's home page have been incorporated in to the
file description if available.
Developer: Mark Hutchinson Publisher: Mark Hutchinson File Name: 7-Seasons_beta.ZIP File Type: Terrain Textures File Version: 0.99 File Release: 18-Jan-2009 File Size: 19.5 MByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Direct Draw graphics mode, Single Player
RELEASE NOTES:
The patch takes the basic three sets of tiles of the PlasV1 tile set, and by adjusting
colour balance and intensity, turns them into seven sets. The intent is to enable
players to see a more diverse and more gradual set of changes to the Red Baron
landscape over the course of a year.
RELEASE NOTES:
This patch is an amalgamation of what I consider to be the best of Todd Comeau's, Rabu's, Kessler's, Somunol's, Flybert's, and my own terrain graphics, as well as Captain Darwin's smoke patch, and Garp's fire patch. The patch comes in two parts, both of which are needed in order to get year-round graphics. Simply unzip the two patches (BSP2TRN1 and BSP2TRN2) to the patches folder if you're using CM, and then add each patch to the list of patches in use. If you don't use CM, copy the contents of the BSP2trn folders to the RedBaron3D\Data folder.
Download Part 1
BSP2TRN1.ZIP (external link, 6.7 MByte)
Download Part 2
BSP2TRN2.ZIP (external link, 5.3 MByte)
Developer: Golgo11 Publisher: Golgo11 File Name: Lit_JPL1.zip File Type: Terrain Textures File Version: 1.0 File Release: 10-May-2009 File Size: 276 kByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Single Player, "Jolly's PL1 3DPatch and Short Airfields" Terrain Pack
RELEASE NOTES
New aerodrome tiles add the landing lights to the runway. For better looking, my other patch "Golgo's Spring/Summer/Autumn Aerodrome Tiles Patch for Jolly's PL1 3DPatch and Short Airfields Terrain Pack" are recommended to install.
Developer: Golgo11 Publisher: Golgo11 File Name: Drm_JPL1.zip File Type: Terrain Textures File Version: 1.0 File Release: 10-May-2009 File Size: 372 kByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Single Player, "Jolly's PL1 3DPatch and Short Airfields" Terrain Pack
RELEASE NOTES
New tiles add the centre marks to the runway.
New Autumn tiles match to the spring/ summer aerodrome layout.
This patch also includes 4 autumn field tiles without bright green parts.
(afarm1.bmp, afarm1x.bmp, autumn0.bmp)
Developer: Jolly / RAC4x Publisher: Jolly / RAC4x File Name: GumpsOSLPL13dpatchVolUpgradeV02.zip File Type: Terrain Textures File Version: V.02 File Release: 12-Jan-2009 File Size: 14.3 MByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Direct Draw graphics mode, Single Player
RELEASE NOTES:
This download is the first of the revised season .vol folders for Gump's upgraded PL1 terrain. Work is continuing with the fall and winter vol folders and they will be available soon and released together with any subsequent improvements that surface for spring/summer.
In this version nomansland is brown (instead of green-ish), the rivers are blue (a nice subdued blue, hope you like it), some colour modifications were done on objects (buildings etc) and mismatches were corrected for distant object files(this is an ongoing work, not perfect, it is intended more improvements will be available in future releases of this .vol folder).
The airport-sized aerodrome has been replaced by a less obvious airstrip nestled amid the local farm fields. Besides the default length landing strip I have included a 'shorter landing strip' set of tiles that can be added (and deleted through the shellpat folder). It makes landing much more of a challenge (particularly with Reload's engine management and fits well with those smaller dromes where the hangars line across the field.
I am particularly interested in getting feedback on the revised airfield. I am aware that some online campaigners might not like the less obvious airfield or the shorter airstrip, but I am quite prepared to release different season .vol folders to accommodate preferences, if there is enough interest.
This .vol has been used on WFP and HA with great effect, especially in WFP using the different aerodrome layouts in Mark66's Moving Front.
Overall I have tried to tone down some of the object colours (bridges, hangars etc) that were more intense than the terrain colours, which made them stand out starkly and unrealistically in the landscape.
Developer: Robert 'Rabu' Hoag
(Website) Publisher: Robert 'Rabu' Hoag
(Website) File Name: ote_3d.zip File Type: Terrain Textures File Version: - File Release: 05-Mar-2003 File Size: 12.2 MByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Single Player, Multi Player
RELEASE NOTES:
This scenery patch does not include effects, buildings or anything that will change the targets or condition of targets in the MMP environment. It is strictly to upgrade the ground, sky and trees for Glide mode.
If you need the terrain for Multi Player only then load into \multi folder!
Developer: Dan 'Skidmark' Reaser
(Website) Publisher: Dan 'Skidmark' Reaser
(Website) File Name: PL2PL.zip File Type: Terrain Textures File Version: - File Release: 01-Jun-2007 File Size: 19.3 MByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Direct Draw graphics mode, Single Player
RELEASE NOTES:
This download includes the following, all bundled together in three .VOL files (3dfall.vol, 3dwinter.vol and 3dpatch.vol) for easy install.
Promised Land "PL2" style Glide terrain (created by Kessler and the Promised Land) for Red Baron 3D compiled by Skidmark from contributions by DeltaK and Dark4ces.
Promised Land Object pack with PL objects, skies and effects.
Developer: Jolly / RAC4X Publisher: Jolly / RAC4X File Name: Jollys-PL1-3dpatch-and-short-airfields.zip File Type: Terrain Textures File Version: - File Release: 01-Mar-2009 File Size: 27.5 MByte Compatibility: Red Baron II/3D, 3Dfx Glide graphics mode, Direct Draw graphics mode, Single Player, Hell's Angels Super Patch 5.0, Flanders Fields Patch, Western Front Patch 2
RELEASE NOTES
3D Patch terrain tiles replacement. Nomansland is now brown(-ish), the rivers blue(-ish), the airfields reworked with an eye on how the tiles are used for factory and depot sites as well.
Works very well in Hells Angels, but will create a few unusual airfields in WFP with Moving Front 4.
Developer: Brigstock / Dark4ces / Promised Land
(Website) Publisher: Brigstock / Dark4ces / Promised Land
(Website) File Name: SprAutWin1.zip File Type: Terrain Textures File Version: - File Release: 07-Feb-2002 File Size: 3.74 MByte + 3.5 MByte Compatibility: Red Baron II/3D, Direct Draw graphics mode, Multi Player
RELEASE NOTES:
Here is a complete 2D "4" season terrain set based on The Promised Land Spring Terrain. The Spring terrain is the original work of "Kess", the Winter terrain is 4ces conversion of the PL Spring Terrain and the Autumn is Brigstock's re-palleted version. Load into \multi!
Download Part 1
SprAutWin1.zip (external link, 3.74 MByte)
Download Part 2
SprAutWin2.zip (external link, 3.5 MByte)
Developer: DeltaK and Dark4Aces
(Website) Publisher: DeltaK and Dark4Aces
(Website) File Name: SprAutWin1.zip File Type: Terrain Textures File Version: - File Release: 07-Feb-2002 File Size: 3.74 MByte + 3.5 MByte Compatibility: Red Baron II/3D, Direct Draw graphics mode, Single Player
RELEASE NOTES:
Here is a complete 2D "4" season terrain set based on The Promised Land Spring Terrain. A combined effort from DeltaK and Dark4ces based on original Spring tiles from Kessler. DeltaK reworked the Summer/Spring, and the Autumn color-match modification with Winter work by Dark4ces.
For SP use … load into \shellpat.
COMPATIBILITY NOTES:
DeltaK/Dark4ces/PL Direct Draw compatible scenery is compatible with the Hell's Angels Super Patch and replaces the default terrain in Direct Draw mode.
Download Part 1
SprAutWin1.zip (external link, 3.74 MByte)
Download Part 2
SprAutWin2.zip (external link, 3.5 MByte)
Developer: Robert 'Rabu' Hoag
(Website) Publisher: Robert 'Rabu' Hoag
(Website) File Name: OTE_DD_scenery.zip File Type: Terrain Textures File Version: - File Release: 14-Jul-2002 File Size: 9 MByte Compatibility: Red Baron II/3D, Direct Draw graphics mode, Single Player, Multi Player
RELEASE NOTES:
OTE Vol. 3i Direct Draw compatible scenery.
This scenery patch is the base-line OTE DD mode compatible scenery
It is strictly to upgrade the ground, sky and trees for DD mode.
Load into \shellpat - does not include PL objects or effects.
COMPATIBILITY NOTES:
OTE Vol. 3i Direct Draw is compatible with the Hell's Angels Super Patch and replaces the default terrain in Direct Draw mode.